0102030405
China Volumetric Flask with PP Stopper - Quality Supplies from Trusted Manufacturers and Suppliers Factory
Volumetric Flask with PP Stopper
- Thickened material
- Accurate measurement
- Can withstand acid and alkali
Transparent
Brown
Product Name:Volumetric Flask with PP Stopper
Product Specifications:5-2000ml
Product Material:High borosilicate glass
Product Introduction:A volumetric flask is a pear shaped flat bottomed container with a neck marked with a line indicating that at the specified temperature, when the liquid level is tangent to the line on the neck of the flask, the volume of the solution is exactly equal to the volume marked on the flask. The volumetric flask is marked with temperature, capacity, and scale lines. It is a precise instrument used to prepare a solution with an accurate concentration of a certain substance.
Product Show
- Thick glass material, excellent workmanship, long service life.
- The bottom of the bottle is round, wide, and placed steadily.
- Multiple specifications are available to meet the needs of different customers.
Transparent Show
Brown Show
Product Details Show
Size Show
Volumetric Flask with PP Stopper Specs
| Description | Picture | Capacity (ml) | Neck Outer Diameter (mm) | Bottom Diameter (mm) | Height (mm) | Weight (g) |
|---|---|---|---|---|---|---|
| Transparent |
|
5 | 12 | 22 | 87 | 12 |
| 10 | 13 | 29 | 99 | 18 | ||
| 20 | 14 | 36 | 121 | 24 | ||
| 25 | 14 | 38 | 121 | 24 | ||
| 50 | 16 | 47 | 150 | 40 | ||
| 100 | 18 | 60 | 185 | 62 | ||
| 200 | 20 | 77 | 218 | 127 | ||
| 250 | 18 | 82 | 235 | 102 | ||
| 500 | 22 | 101 | 279 | 150 | ||
| 1000 | 28 | 127 | 340 | 268 | ||
| 2000 | 33 | 155 | 410 | 522 | ||
| Brown |
|
5 | 12 | 23 | 89 | 13 |
| 10 | 12 | 29 | 102 | 16 | ||
| 20 | 14 | 36 | 121 | 23 | ||
| 25 | 14 | 39 | 122 | 24 | ||
| 50 | 16 | 47 | 150 | 39 | ||
| 100 | 18 | 61 | 179 | 62 | ||
| 200 | 18 | 75 | 233 | 101 | ||
| 250 | 19 | 81 | 236 | 98 | ||
| 500 | 23 | 101 | 285 | 160 | ||
| 1000 | 28 | 126 | 337 | 265 |
Precautions
⚠️ To check the airtightness, invert the volumetric flask and observe for water leakage. Then rotate the cork 180 degrees to observe for water leakage.
- (1) Solute cannot be dissolved in the volumetric flask, but should be transferred to the flask after being dissolved in a beaker.
- (2) The total amount of solvent used to wash the beaker cannot exceed the marking on the volumetric flask. Once exceeded, it must be re prepared.
- (3) The volumetric flask cannot be heated. If the solute releases heat during the dissolution process, it should be transferred after the solution has cooled down, because as the temperature rises, both the bottle and the liquid will expand, and the expansion coefficient will be different, resulting in inaccurate volume measurement.
- (4) Volumetric flasks can only be used for preparing solutions and should not be stored for long periods of time, as the solution may corrode the bottle body, thereby affecting the accuracy of the volumetric flask.
- (5) After using the volumetric flask, it should be washed clean in a timely manner, the cork should be added, and a piece of paper should be sandwiched between the cork and the bottle mouth to prevent the cork from sticking to the bottle mouth.
- (6) A volumetric flask can only prepare a certain volume of solution, but generally retains 4 significant figures (such as 250.0ML). It cannot be estimated that the number after the decimal point will change just because the solution exceeds or does not reach the scale line, and can only be reconfigured. Therefore, when writing the volume of the solution, it must be XXX.0ML.
Frequently Asked Questions (FAQ)
Can I dissolve substances directly inside the volumetric flask?
No, solutes should never be dissolved directly inside the volumetric flask. You must dissolve the substance in a beaker first, and then transfer the solution into the volumetric flask.
Why can't the volumetric flask be heated?
Heating a volumetric flask changes its volume measurements. As the temperature rises, both the glass bottle and the liquid expand at different rates, leading to inaccurate volume calibration. Solutions that release heat during dissolution must be cooled down before transfer.
How do I test the airtightness of the PP stopper?
To check airtightness, fill the flask with water, insert the PP stopper, invert the flask, and look for leakage. Then, rotate the cork 180 degrees and check again to ensure a secure seal.
Can I use the volumetric flask to store prepared solutions for a long time?
No, volumetric flasks are strictly designed for preparing accurate solutions, not for long-term storage. Stored chemicals may corrode the glass body, affecting the future accuracy of the flask.
What is the material of the volumetric flask and what are its features?
The volumetric flask is made of high borosilicate glass. It features a thickened material structure, can withstand acids and alkalis, and offers highly accurate measurements.
How should I store the volumetric flask after cleaning it?
After cleaning, add the PP stopper back onto the mouth. It is recommended to place a small piece of paper between the stopper and the bottle mouth to prevent the stopper from sticking over time.